Simple Methods To Add USB To A Car Stereo
With the large improvement in technology, the number of modes of listening to music in the car while driving has increased to a great extent in an exponential way in the last decade. The latest development was the USB port. This can be found in the computers for data transfer between the computer and music players and mp3 players. This is however absent in the cars. But with little adjustments and connections, USB port can be used to play the mp3 player. This will need an extra adapter cable. This will allow any mp3 player to be plugged to auxiliary port on radio or even into the cigarette lighter. We must however know in detail how to use USB for a car stereo and the various connections involved.
This article lists all the tools required to use USB in the stereo of the car and it also explains the procedure to remove the same without much difficulty. If we go for a car mechanic or an engineer they may charge heavily or doing this simple work of installing the cable for port of USB .So, doing this on our own is the right choice.
The first step in this process is to check the stereo thoroughly and make sure there is actually no USB port. It is a very small port measuring about half inches and quarter inch tall. The latest cars may have this port. There is a particular logo with trident near the port. If the car certainly does not have this port, check for the auxiliary port. This is present in most of the cars and is circular. It is used to connect the headphones.
The first thing to do is to check the features of the car stereo. Because the new cars may have an USB port already installed so it is important to check it first. The USB can be easily identified based on its size. Its just half inch tall and quarter inch wide.
There is a provision for USB port in the stereo of the car where the cable is plugged after connection with player for MP3. Even if we don’t find USB port there is absolutely no problem as we can use Axillary port instead of the port for USB cable connection.
The radio is then adjusted in such a way that it finds a station that has no broadcasts. This is to ensure minimal disturbances to the player.
In the next step the aux jack and the aux port should be connected. Now a connection is established between the USB cable and AC power adapter. Then this is connected to the music player. There is a connection between the AC adapter and the cigar lighter.
This article therefore teaches you how to use USB for a car stereo.
Want to find out more about , then visit Author Name’s site on how to choose the best for your needs.
Leave a comment